No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for NTP

Licensing Requirements and Limitations for NTP

Involved Network Elements

Other network elements are required to support NTP.

Licensing Requirements

NTP is a basic feature of a switch and is not under license control.

Version Requirements

Table 11-2  Applicable product models and versions
Product

Software Version

S600-E

V200R010C00, V200R011C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • The existing configuration will not be deleted when the NTP service is disabled.

  • The S600-E does not support Real-Time Clock (RTC). It is recommended that you configure NTP to ensure time accuracy in logs.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25718

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next