No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View the Serial Number of a Device?

How Can I View the Serial Number of a Device?

Method 1: Obtain the Equipment Serial Number by Using a Command

Run the display elabel slot slot-id command to view electronic label information. slot-id specifies the slot ID of the device. In the command output, BarCode specifies the equipment serial number.
<HUAWEI> display elabel slot 0
/$[System Integration Version]  
/$SystemIntegrationVersion=3.0   
      
      
[Slot_0]      
/$[Board Integration Version]  
/$BoardIntegrationVersion=3.0  
    
    
[Main_Board]     
      
/$[ArchivesInfo Version]      
/$ArchivesInfoVersion=3.0       
                 
           
[Board Properties]   
BoardType=S628X-PWR-E
BarCode=21980105981234567890  
Item=98010598 
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label.

Method 2: Obtain the Equipment Serial Number Through the Web System

When enabled on a device, the web system can be used to view the equipment serial number.

EasyOperation web system

Log in to a device through the web system and click Monitor on the toolbar to view device information, including the equipment serial number, as shown in Figure 1-1.

Figure 1-1  System Description

Web system classical version (not supported in V200R011C10 and later versions)

Log in to a device through the web system and click Device Summary on the toolbar to view board information, including the equipment serial number, as shown in Figure 1-2.

Figure 1-2  Board information

Method 3: Obtain the Equipment Serial Number by Viewing the Serial Number Label

The equipment serial number label is attached to the rear side of the device.



NOTE:
The serial number label has a total of 20 characters, for example, 210235383610C3000006. The serial number shown in the figure is only used as an example. The serial number label location on the rear side of a device varies according to the device model.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25326

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next