No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Device to Output Logs to the Log Buffer

Configuring the Device to Output Logs to the Log Buffer

Context

To view logs in the log buffer, configure the device to output logs to the log buffer.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run info-center logbuffer

    The device is enabled to output information to the log buffer.

    By default, the device is enabled to output logs to the log buffer.

  3. Run info-center logbuffer channel { channel-number | channel-name }

    The channel used by the device to output logs to the log buffer is specified.

    By default, the device uses channel 4 to output logs to the log buffer.

  4. Run info-center source { module-name | default } channel { channel-number | channel-name } log { state { off | on } | level severity } *

    A rule for outputting logs to a channel is set.

    By default, channel 4 is enabled to output logs and the lowest log severity is warning.

  5. (Optional) Run info-center logbuffer size logbuffer-size

    The maximum number of logs in the log buffer is set.

    By default, a log buffer can store a maximum of 512 logs.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25299

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next