No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the CPU Usage Alarm Threshold

Configuring the CPU Usage Alarm Threshold

Context

The CPU is the core of a device. When the system has a large number of routes, many CPU resources will be used. This degrades system performance and causes high packet loss or a delay in processing data. If high CPU usage occurs when processing data, the device can generate an alarm. This enables you to monitor CPU usage and optimize system performance.

  • CPU usage alarm threshold

    When CPU usage reaches this threshold, the system generates an alarm.

  • CPU usage alarm recovery threshold

    When CPU usage falls below this threshold, the system clears the alarm.

Procedure

  1. (Optional) Run display cpu-usage configuration [ slave | slot slot-id ]

    The CPU usage configurations are displayed.

  2. Run system-view

    The system view is displayed.

  3. Run cpu-usage threshold threshold-value [ restore restore-threshold-value ] [ slot slot-id ]

    The CPU usage alarm threshold and CPU usage alarm recovery threshold are set.

    By default, the CPU usage alarm threshold is 95% and the CPU usage alarm recovery threshold is 80%.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26326

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next