No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Saving the Configuration That Is Automatically Generated for Dedicated Cable Stacking to the Flash Memory

Saving the Configuration That Is Automatically Generated for Dedicated Cable Stacking to the Flash Memory

Context

After a stack has been set up using dedicated stack cables, the stack configuration that is automatically generated will not be automatically saved to the flash memory. To ensure that the stack configuration still takes effect when these cables are removed or other cables are connected, save the automatically generated stack configuration to the flash memory.

NOTE:

No stack configurations cannot be manually modified before the automatically generated stack configuration is saved to the flash memory. The system displays error information: "Error: The operation failed because there was unsaved stack configuration. Please save the stack configuration first."

Procedure

  1. Run the system-view command to enter the system view.
  2. (Optional) Run the display stack configuration command to view the stack configuration.

    If there is configuration starting with a number sign (#) in the command output, this configuration is not saved to the flash memory. In this situation, no stack configurations can be modified.

  3. You can use the following methods to save the stack configuration that is automatically generated for dedicated cable stacking to the flash memory.

    • Run the save stack configuration or save command to save the automatically generated stack configuration to the flash memory.
    • If the switch has a configuration file, the stack configuration that is automatically generated for dedicated cable stacking is saved to the flash memory after the switch is restarted with power on.
    • If ASs in an SVF system are correctly connected using dedicated stack cables, the stack configuration that is automatically generated for dedicated cable stacking is saved to the flash memory.
      If dedicated stack cables are removed and the stack configuration that is automatically generated for dedicated cable stacking is not saved to the flash memory, this stack configuration is cleared.

  4. Run the display stack configuration command to check whether all stack configurations are saved to the flash memory.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25410

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next