No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fault Management Fundamentals

Fault Management Fundamentals

When receiving alarms and events generated on the device, the fault management module stores them based on the default severities, and records the generation time.

After the fault management function is configured, you can:
  • Change the alarm severities on the device and configure filtering rules on the NMS to filter out unnecessary alarms.
  • Enable the alarm reporting delay function to prevent alarms from being reported repeatedly. When the alarm reporting delay period expires, only the last alarm is reported.
  • Enable the event reporting delay function to prevent events from being reported repeatedly. When the event reporting delay period expires, only the last event is reported.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26017

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next