No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Terminating the Registration with the Cloud Management Platform

Terminating the Registration with the Cloud Management Platform

Context

After an SSH login to a switch, terminate the registration of the switch with the cloud management platform to prevent the SSH login termination caused by IP address re-assignment from a DHCP server to the switch.

Procedure

  • Run the cloud-mng register abort command to terminate the registration of the switch with the cloud management platform.

    By default, a switch registers with the cloud management platform normally.

    NOTE:
    • The cloud-mng register abort command cannot be executed repeatedly.

    • Do not run this command when the switch has registered with the cloud management platform successfully.

    • The command configuration will not be recorded to the configuration file and becomes ineffective after the switch restarts.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25374

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next