No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Can I Do If the CPU Usage Is High?

What Can I Do If the CPU Usage Is High?

If the CPU usage is high, perform the following operations:
  1. Check whether the CPU usage keeps increasing or increases instantly. An instant increase in the CPU usage may indicate that an operation has just been performed, for example, the device has just been started, information about all optical modules has been queried, or the volume of traffic has increased instantly. This situation does not affect the device operation.
  2. Check which task processes consume the most CPU resources and analyze the tasks.
  3. Check log information and alarm information to determine whether a hardware fault alarm is generated.
  4. Analyze log information and alarm information to determine whether an interface frequently alternates between Up and Down states. If so, check whether the optical module of the interface is faulty or a non-Huawei-certified optical module is used. Additionally, analyze the configuration and traffic volume of the interface.
  5. Check whether network management operations are frequently performed on the device.
  6. Check whether flapping occurs with STP or routing protocols.
  7. Check whether the network topology changes and whether a loop exists on the network.
  8. Check whether malicious attacks are in progress.

For details about how to locate high CPU usage, see "High CPU Usage" in Troubleshooting.

Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26614

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next