No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Cloud-based Management Operations

Monitoring Cloud-based Management Operations


  • Run the display work-mode command to check the working mode of the switch.
  • Run the display cloud-mng configuration command to check the cloud management platform information. This command cannot display cloud management platform information that is obtained through DHCP or the registration center.
  • Run the display cloud-mng connect-attribute command to check information about the connection between the switch and cloud management platform.
  • Run the display cloud-mng register-status command to check the status of registration with the cloud management platform.
  • Run the display cloud-mng register-fail-record command to check records about failures to register with the cloud management platform.
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25816

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next