No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Client Clock

Configuring the Client Clock

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ntp-service sync-interval interval

    The interval for synchronizing the client clock is configured.

    By default, the interval for synchronizing the client clock is 600 seconds.

  3. Run ntp-service max-distance max-distance-value

    The maximum NTP synchronization distance is configured.

    By default, The maximum NTP synchronization distance is 1 second.

Verifying the Configuration

  • Run the display current-configuration | include ntp command to view NTP configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25821

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next