No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Cloud-based Management Configuration

Clearing Cloud-based Management Configuration


To stop providing network services, run the following commands to clear all the cloud-based management configurations.

After the cloud-based management configurations are complete, the system asks you whether to restart the switch. If you enter Y, the switch restarts and clears all the cloud-based management configurations. Confirm your action.


  1. Run the system-view command to enter the system view.
  2. Run the reset cloud-mng db-configuration command to clear the cloud-based management configurations.
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 25659

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next