No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stack Membership

Stack Membership


In a stack, switches take on one of three roles: master, standby, and slave.
  • Master switch

    The master switch manages the stack. A stack has only one master switch.

  • Standby switch

    The standby switch is the backup of the master switch. A stack has only one standby switch. If the master switch becomes unavailable, the standby switch assumes the master role, and continues to the keep the stack operational.

  • Slave switch

    A slave switch forwards service traffic. A stack may have multiple slave switches. A high number of slave switches can increase forwarding performance in a stack.

    Apart from the master and standby switches, all the other member switches are slave switches. If the standby switch becomes unavailable, a slave switch assumes the standby role.

The master switch, standby switch, and slave switches are responsible for forwarding service traffic.

Adding, removing, or replacing a stack member may change the stack member roles. For details about add and remove a stack member, see Adding and Removing a Stack Member. For details about replace a stack member, see Replacing a Stack Member.

Standalone Stack

A standalone device is a device stack with one stack member that also operates as the master switch. You can connect one standalone device to another to create a device stack containing two stack members, with one of them as the master switch. You can connect standalone devices to an existing device stack to increase the stack membership.

Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26281

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next