No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Renaming an AS

Renaming an AS

Context

If an AS has no pre-configured name before being connected to the parent, by default, the AS uses the "system default name-device MAC address" as its name after being connected to the parent.

To facilitate identification and management of ASs, you are advised to configure a memorable name for an AS.

Procedure

  1. Pre-configure a name for an AS before the AS is connected to the parent.
    1. Run system-view

      The system view is displayed.

    2. Run uni-mng

      The uni-mng view is displayed.

    3. Run as name as-name model as-model mac-address mac-address

      An AS name is configured.

  2. Pre-configure a name for an AS after the AS is connected to the parent.
    1. Run system-view

      The system view is displayed.

    2. Run uni-mng

      The uni-mng view is displayed.

    3. Run display this

      The AS group to which the AS is added and the port group to which AS ports are added are displayed.

    4. Run as-group name group-name

      The view of the AS group to which the AS is added is displayed.

    5. Run as name as-name or as name-include string

      The AS is removed from the AS group.

    6. Run quit

      Exit from the AS group view.

    7. Run port-group name group-name

      The view of the port group to which AS ports are added is displayed.

    8. Run as name as-name interface { { interface-type interface-number1 [ to interface-number2 ] } &<1-10> | all } or as name-include string interface all

      AS ports are removed from the port group.

    9. Run quit

      Exit from the port group view.

    10. Run as name as-name model as-model mac-address mac-address

      An AS name is configured.

    11. After a name is configured for an AS, add the AS to the specified AS group again and add AS ports to the specified port group again.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26628

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next