No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Diagnostic Information

Displaying Diagnostic Information


When the system experiences a fault or during routine maintenance, you can view diagnostic information to collect the running information of all modules.

Diagnostic information is mainly used for fault location. Collecting diagnostic information may affect system performance, for example, increase the CPU usage. Therefore, it is recommended not to collect diagnostic information when the system is running normally.


  • Run the display diagnostic-information [ acl | arp | defend | dhcp | l2adp | l3adp | lbdt | lldp | mcast | qos | rrpp | smlk | srm | stack | stat | stp | ucm ] [ file-name ] command to view the device diagnostic information.
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26774

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next