No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for NTP

Application Scenarios for NTP

Typical Application Scenario

On the network in Figure 11-8, SwitchA is accessing the NTP master clock server to synchronize all clocks within the network. SwitchA is configured as the unicast server, and SwitchB, SwitchC and SwitchD are configured as unicast clients. SwitchE acts as a symmetric peer of both the upstream SwitchB and downstream SwitchF.

Figure 11-8  Typical NTP networking

Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26812

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next