No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling the Receiving of RIPng Routes

Controlling the Receiving of RIPng Routes

Pre-configuration Tasks

Before controlling the receiving of RIPng routes, configure basic RIPng functions.


  1. Run system-view

    The system view is displayed.

  2. Run ripng [ process-id ]

    The RIPng view is displayed.

  3. Run filter-policy { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } import

    The RIPng process is configured to filter received routes.

    You can use ACL6, route policy and IPv6 prefix lists to filter received RIPng routes, allowing only the routes matching ACL6, route policy and IPv6 prefix lists to be added to RIPng routing tables.

Verifying the Configuration

  • Run the display ripng process-id database [ verbose ] command to check all the active routes in the RIPng database.

  • Run the display ripng process-id route command to check all the RIPng routes learned from other switches.

Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 33685

Downloads: 3

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next