No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of OSPFv3 Configuration Tasks

Summary of OSPFv3 Configuration Tasks

After basic OSPFv3 functions are configured, you can build a basic OSPFv3 network. If other OSPFv3 functions are required, configure them according to reference sections.

Table 6-6 describes the OSPFv3 configuration tasks.

Table 6-6  OSPFv3 configuration tasks

Scenario

Description

Task

Constructing a basic OSPFv3 network

Enable the OSPFv3 process and specify the router ID before configuring OSPFv3. After this is complete, other OSPFv3 functions can be configured or take effect.

Configuring OSPFv3 special area attributes

You can flexibly use OSPFv3 special area attributes to deploy the network according to actual requirements. The special areas are as follows:

Configuring OSPFv3 route attributes

You can configure the OSPFv3 route attributes to change OSPFv3 route selection policies. This can help meet the requirements of complex network environments.

Configuring OSPFv3 Route Attributes

Controlling OSPFv3 routing information

You can configure route summarization as well as the filtering of received and advertised routes. Route summarization lowers the number of external routes in the LSDB and provides accurate control of OSPFv3 routing information.

Controlling OSPFv3 Routing Information

Adjusting and optimizing OSPFv3 networks

You can change the OSPFv3 packet timer to adjust the OSPFv3 network convergence rate and network load caused by protocol packets. On some low-rate links, the delay of LSA transmission by interfaces must be taken into account. You can adjust the Shortest Path First (SPF) calculation interval to restrict resource consumption caused by frequent network changes.

Optimizing an OSPFv3 Network

Configuring OSPFv3 GR

You can enable OSPFv3 GR features to prevent route flapping and interruption of traffic forwarding caused by an OSPFv3 restart.

After OSPFv3 is restarted, the GR restarter and the GR helper reestablish neighbor relationships, exchange routing information, synchronize the database, and update the routing and forwarding tables. This implements fast OSPFv3 convergence.

Configuring OSPFv3 GR

Configuring the OSPFv3 network management function

OSPFv3 supports the network management function as well as fault and log functions. You can bind the OSPFv3 management information base (MIB) to a process to use these functions.

Configuring the Network Management Function of OSPFv3

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 26077

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next