No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Static Routes

Overview of Static Routes

Definition

A static route is a fixed route that allows network traffic to reach its target destination. Typically, static routes are manually configured by network administrators.

Purpose

Static routes are used in different ways on different types of network.

  • On simple networks, static routes can be used alone, without the need for dynamic routes.

  • On complex networks, static routes can be used alongside dynamic routes to improve network performance and ensure that bandwidth is available for important applications.

  • Static routes can be associated with VPN instances to manage VPN routes.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 26340

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next