No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the Mesh-Group Function

(Optional) Enabling the Mesh-Group Function


To reduce the load on concurrent links between two switches, you can enable the mesh-group function.

A neighboring router ID uniquely identifies a mesh group. A mesh group contains several concurrent links, and flooding is implemented only once after the group is created. Interfaces can be added to the same mesh group only when the following conditions are met:

  • The interfaces belong to the same area and OSPF process.
  • The status of the interfaces is higher than Exchange.
  • The interfaces connect to the same neighboring switch.

Perform the following steps on a switch running OSPF.


  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id ]

    The OSPF process view is displayed.

  3. Run mesh-group enable

    The mesh-group function is enabled.

    By default, the mesh-group function is disabled.

Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 29583

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next