No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPF Stub Areas

Configuring OSPF Stub Areas

Applicable Environment

Partitioning an AS into different areas reduces the number of LSAs. To further reduce the number of entries in routing tables and the number of LSAs to be transmitted in a non-backbone area, configure the non-backbone area on the border of the AS as a stub area.

Configuring a stub area is optional.

Note the following points when configuring a stub area:

  • The backbone area (Area 0) cannot be configured as a stub area.
  • If an area is to be configured as a stub area, all the switches in this area must be configured with stub attributes using the stub command.
  • An ASBR cannot exist in a stub area to import AS external routes.
  • Virtual links cannot exist in stub areas.

Pre-configuration Tasks

Before configuring OSPF stub areas, complete the following tasks:

Configuration Procedure

Figure 5-57  Flowchart of configuring OSPF stub areas
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 33762

Downloads: 3

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next