No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic OSPFv3 Functions

Configuring Basic OSPFv3 Functions

Applicable Environment

Configure basic OSPFv3 functions before building OSPFv3 networks. Enable OSPFv3 and specify the interface, area ID, and router ID before configuring other functions.

Pre-configuration Tasks

Before configuring basic OSPFv3 functions, complete the following tasks:

  • Enable IPv6 capabilities.

  • Make the network layers of the adjacent nodes accessible.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 34676

Downloads: 3

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next