No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hot Standby

Hot Standby

The RIP hot standby feature is supported by devices with distributed architecture.

During hot standby, a device backs up RIP data from the active main board (AMB) to the standby main board (SMB). When the AMB becomes faulty, the SMB becomes active and takes over AMB tasks. This ensures normal data forwarding.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 25873

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next