No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing OSPF Information

Clearing OSPF Information


OSPF information cannot be restored after you clear it. Therefore, confirm the action before you use the commands.

To clear OSPF information, run the following reset commands in the user view.


  • Run the reset ospf [ process-id ] counters [ neighbor [ interface-type interface-number ] [ router-id ] ] command to reset OSPF counters.

    • counters: indicates OSPF counters.
    • neighbor: indicates neighbor information on a specified interface.

  • Run the reset ospf [ process-id ] redistribution command in the user view to re-import routes by OSPF.
  • Run the reset gtsm statistics all command to clear the GTSM statistics from the device.
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 25785

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next