No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - IP Unicast Routing

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, Routing Policy, IP Routing Table Management, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Interval for Retransmitting LSAs Between Adjacent Switches

Configuring an Interval for Retransmitting LSAs Between Adjacent Switches

Context

After a switch sends an LSA to its neighboring switch, the switch waits for a response within an interval. If no response is received within the interval, the switch retransmits the LSA to the neighboring switch.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The OSPF interface view is displayed.

  3. Run ospf timer retransmit interval

    An interval at which LSAs are retransmitted between adjacent switches is set.

    By default, the interval is 5s.

    NOTE:

    Generally, the interval at which LSAs are retransmitted between adjacent switches must be greater than the round trip time of a packet transmitted between the two switches. Otherwise, some LSAs are retransmitted unnecessarily.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066165

Views: 25751

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next