No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring 802.1X Authentication Triggered by a DHCP Packet

(Optional) Configuring 802.1X Authentication Triggered by a DHCP Packet

Context

In the 802.1X authentication network, if a user uses a built-in 802.1X client of a PC operating system (such as Windows), the user cannot enter the user name and password proactively to trigger authentication.

For such users, the administrator configures 802.1X authentication triggered by a DHCP packet. After 802.1X authentication triggered by a DHCP packet is enabled, the device triggers 802.1X authentication for a user upon receiving a DHCP packet from the user. A built-in 802.1X authentication page of the operating system is automatically displayed on the user terminal. The user enters the user name and password for authentication.

Alternatively, 802.1X authentication triggered by a DHCP packet enables the user to implement authentication using the built-in 802.1X client of the operating system. After being authenticated, the user accesses an 802.1X client download web page to download and install the 802.1X client software, which facilitates fast network deployment.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dot1x dhcp-trigger

    802.1X authentication triggered by a DHCP packet is enabled.

    By default, 802.1X authentication triggered by a DHCP packet is disabled

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 23406

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next