No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the User Authentication Domain

(Optional) Configuring the User Authentication Domain

Context

When the MAC address or the fixed user name without a domain name is used as the user name in MAC address authentication, the user is authenticated in a default domain if the administrator does not configure an authentication domain. In this case, many users are authenticated in the default domain, making the authentication scheme inflexible.

The authentication domain for the MAC address authentication user can be configured globally or on an interface.
  • When configured globally, the authentication domain is valid for all interfaces.
  • When configured on an interface, the authentication domain is valid for this interface only. The priority of the user name configured on the interface is higher than that of the user name configured globally. If no authentication domain is configured on the interface, you can use the globally configured authentication domain.
NOTE:
  • When the fixed user name is used for MAC address authentication and the authentication domain is specified in the user name, the user is authenticated in the specified authentication domain.

  • Before configuring an authentication domain for the MAC address authentication user, ensure that the authentication domain has been created.

Procedure

  • In the system view:
    1. Run system-view

      The system view is displayed.

    2. Run mac-authen domain isp-name [ mac-address mac-address mask mask ]

      The authentication domain is configured for the MAC address authentication user.

      By default, MAC address authentication uses the global default domain.

  • In the interface view:
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run mac-authen domain isp-name

      The authentication domain is configured for the MAC address authentication user.

      By default, MAC address authentication uses the global default domain.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20230

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next