No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the HWTACACS AAA Configuration

Verifying the HWTACACS AAA Configuration


  • Run the display aaa configuration command to check the AAA summary.
  • Run the display authentication-scheme [ authentication-scheme-name ] command to verify the authentication scheme configuration.
  • Run the display authorization-scheme [ authorization-scheme-name ] command to verify the authorization scheme configuration.
  • Run the display accounting-scheme [ accounting-scheme-name ] command to verify the accounting scheme configuration.
  • Run the display recording-scheme [ recording-scheme-name ] command to verify the recording scheme configuration.
  • Run the display service-scheme [ name name ] command to verify the service scheme configuration.
  • Run the display hwtacacs-server template [ template-name ] command to verify the HWTACACS server template configuration.
  • Run the display hwtacacs-server template template-name verbose command to check statistics about HWTACACS authentication, accounting, and authorization.
  • Run the display hwtacacs-server accounting-stop-packet { all | number | ip ip-address } command to verify information about accounting-stop packets of the HWTACACS server.
  • Run the display domain [ name domain-name ] command to verify the domain configuration.
  • Run the display aaa statistics access-type-authenreq command to display the number of authentication requests.
  • Run the display access-user user-name-table statistics { all | username username } command to check statistics on users who are allowed to access the network using the user name.
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20688

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next