No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Procedure for NAC

Configuration Procedure for NAC

Pre-configuration Tasks

NAC only provides multiple network access control protocols for users. To completely authenticate user identity and control users' network access rights, complete the following AAA configuration tasks before configuring NAC:

  • Configure the domain and AAA scheme.
  • Configure the user name and password on the RADIUS or HWTACACS server if RADIUS or HWTACACS authentication is used.
  • Configure the user name and password on the network access device if local authentication is used.

For details about how to configure the AAA client, see AAA Configuration.

Configuration Procedure

Figure 2-47  NAC Configuration Procedure

NAC Configuration Tasks

Authentication Mode

Scenario

Task

802.1X authentication

Users are densely distributed and high information security is required.

MAC Address authentication

Dumb terminals such as printers and fax machines need to connect to the network.

Portal authentication

Users are sparsely distributed and move frequently.

Portal servers are classified into built-in and external Portal servers. A built-in Portal server is integrated in an access device, whereas an external Portal server has independent hardware. Compared with the external Portal server, the built-in Portal server supports more flexible deployment, but provides only basic functions of the external Portal server.

When using a built-in Portal server for authentication, perform the following configurations in sequence:
  1. Configuring a Portal Access Profile (for a Built-in Portal Server)
  2. Configuring an Authentication Profile
  3. NAC Application

Multi-mode authentication

The device allows multiple authentication modes to be deployed simultaneously to meet various authentication requirements on the network.

To configure multi-mode authentication of several authentication modes, you only need to bind corresponding access profiles to an authentication profile. The device triggers the corresponding authentication based on received authentication packets.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20621

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next