No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Should I Be Aware of When Connecting the Device to a Symantec RADIUS Server?

What Should I Be Aware of When Connecting the Device to a Symantec RADIUS Server?

  • The Symantec RADIUS server can only be used as an authentication server, not as an authorization or accounting server. For this reason, when the device connects to a Symantec RADIUS server, ensure that the RADIUS server is not configured as an authorization or accounting server.
  • When the Symantec RADIUS server performs 802.1X authentication for users, perform the following configurations on the device:
    • Run the undo dot1x handshake command to disable handshake between the device and 802.1X online users.

    • Run the dot1x authentication-method eap command to configure EAP relay authentication for 802.1X users.

Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 27027

Downloads: 7

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next