No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Global Default Domains

Configuring Global Default Domains


The device determines the domain to which a user belongs based on the user name. If a user name does not contain a domain name, the device cannot determine the domain to which the user belongs, and adds the user to a global default domain. Based on user types (access users or administrators), global default domains are classified into the global default common domain and global default administrative domain.


  1. Run system-view

    The system view is displayed.

  2. Configure global default domains.

    • Run domain domain-name

      The global default common domain is configured.

    • Run domain domain-name admin

      The global default administrative domain is configured.

    By default, two global default domains are available on the device: global default common domain named default and global default administrative domain named default_admin.


    The same domain name can be set for the global default common domain and global default administrative domain.

Verifying the Configuration of Global Default Domains

Run the display aaa configuration command to check the configuration of global default domains.
<HUAWEI> display aaa configuration
  Domain Name Delimiter            : @
  Domainname parse direction       : Left to right
  Domainname location              : After-delimiter
  Administrator user default domain: default_admin    //Global default administrative domain
  Normal user default domain       : default    //Global default common domain
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 27738

Downloads: 7

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next