No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring 802.1X Authentication

Configuring 802.1X Authentication

You can configure 802.1X authentication to implement interface-based network access control. This means you can authenticate and control access users connected to an access control device interface.

Pre-configuration Tasks

802.1X only provides a user authentication solution. To implement this solution, the AAA function must also be configured. Therefore, complete the following tasks before you configure 802.1X authentication:

  • Configure the authentication domain and AAA scheme on the AAA client.
  • Configure the user name and password on the RADIUS or HWTACACS server if RADIUS or HWTACACS authentication is used.
  • Configure the user name and password manually on the network access device if local authentication is used.

For the configuration of AAA client, see AAA Configuration.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 22695

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next