No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing 802.1X Authentication Statistics

Clearing 802.1X Authentication Statistics


Statistics cannot be restored after being cleared. Exercise caution when you run the following command.


  • Run the reset dot1x statistics [ interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10> ] command in the user view to clear the statistics for 802.1X authentication.
  • Run the reset access-user dot1x-identity statistics command in the system view to clear statistics about Identity packets for 802.1X authentication on a switch.
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20939

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next