No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Local Authentication and Authorization

Configuring Local Authentication and Authorization

Local Authentication and Authorization

After local authentication and authorization are configured, the device authenticates and authorizes access users based on local user information. In local authentication and authorization, user information, including the local user name, password, and attributes, is configured on the device. Local authentication and authorization feature fast processing and low operation cost. However, the amount of local authentication and authorization information that can be stored is subject to the device hardware capacity.

Configuration Procedure




Configure a local server.

Configure a local user.

Create a local user. The device authenticates the local user using the created user information.

Configure local authorization rules.

Create authorization rules. The device authorizes the user based on the created authorization rules.

Configure and apply AAA schemes.

Configure AAA schemes.

Configure authentication, authorization, and accounting schemes.

(Optional) Configure a service scheme.

User authorization information can also be configured in the service scheme.

Apply the AAA schemes to a domain.

The created AAA schemes and service scheme take effect only after they are applied to the domain to which users belong.


Verify the configuration.

Verify the configuration.

Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 27405

Downloads: 7

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next