No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Combined Authentication

Combined Authentication

In a network environment with diversified clients, different clients can be assigned different access authentication modes. Some clients, such as printers, only support MAC address authentication. Some hosts support 802.1X authentication because they have 802.1X client software installed. Some user hosts require Portal authentication using web browsers. If the preceding authentication modes are all used on a single network, they must all be configured on user access interfaces so users are able to use the correct authentication mode to connect to the network.

The combined authentication solution meets the preceding requirements. The Portal authentication, MAC address authentication and 802.1X authentication are enabled on a device, so clients can be authenticated in any one of the three authentication modes.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20846

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next