No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Device to Dynamically Adjust the Rate at Which It Processes Packets from NAC Users

Enabling the Device to Dynamically Adjust the Rate at Which It Processes Packets from NAC Users

Context

When a lot of NAC users send authentication or log off requests to the device, the CPU usage may be overloaded especially when the CPU or memory usage is already high (for example, above 80%). After the device is enabled to dynamically adjust the rate of packets from NAC users, the device limits the number of NAC packets received per second if the CPU or memory usage is high. This function reduces loads on the device CPU.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run authentication speed-limit auto

    The device is enabled to dynamically adjust the rate at which it processes packets from NAC users.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20318

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next