No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring User Information Synchronization

(Optional) Configuring User Information Synchronization

Context

If communication is interrupted because the network between the device and Portal server is disconnected or the Portal server is faulty, online Portal authentication users cannot go offline. Therefore, user information on the device and on the Portal server may be inconsistent and accounting may be inaccurate.

The user information synchronization function ensures that user information on the Portal server is the same as that on the device, ensuring accurate accounting.
NOTE:

This function is valid for only external Portal servers.

For Layer 3 Portal authentication, the device currently can synchronize user information with the Huawei Agile Controller-Campus server. When the device is connected to other Portal servers, user information may fail to be synchronized and users cannot go offline in real time. In this case, you can run the cut access-user command or use the NMS or RADIUS DM to force users to go offline.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run web-auth-server server-name

    The Portal server template view is displayed.

  3. Run user-sync [ interval interval-period | max-times times ] *

    User information synchronization is enabled.

    By default, user information synchronization is disabled.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20726

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next