No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MAC Address Authentication

Enabling MAC Address Authentication

Context

The MAC address authentication configuration takes effect on an interface only after MAC address authentication is enabled globally and on the interface.

After MAC address authentication is enabled, if there are online users who log in through MAC address authentication on the interface, disabling MAC address authentication is prohibited.

For MAC address authentication, ensure that the interface type is hybrid when you configure the authorization VLAN.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mac-authen

    Global MAC address authentication is enabled.

    By default, global MAC address authentication is disabled.

  3. Enable MAC address authentication on an interface in the system or interface view.

    In the system view:

    1. Run mac-authen interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>

      MAC address authentication is enabled on the interface.

    In the interface view:

    1. Run interface interface-type interface-number

      The interface view is displayed.

    2. Run mac-authen

      MAC address authentication is enabled on the interface.

    By default, MAC address authentication is disabled on an interface.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 21135

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next