No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the NAC Extended Functions Configuration

Verifying the NAC Extended Functions Configuration

Context

After configuring extended functions, run the following commands to check the configuration.

Procedure

  • Run the display access-context profile [ name profile-name ] command to check the configuration of the user context profile.
  • Run the display access-author policy [ name policy-name ] command to check the configuration of the authorization policy for user authentication events.
  • Run the display static-user [ domain-name domain-name | interface interface-type interface-number | ip-address start-ip-address [ end-ip-address ] | vpn-instance vpn-instance-name ] * [ detail ] command to check information about static users.
  • Run the display portal quiet-user { all | user-ip ip-address | server-ip ip-address } command to check information about Portal authentication users who are quieted.
  • Run the display mac-authen quiet-user { all | mac-address mac-address } command to check information about MAC address authentication users who are quieted.
  • Run the display dot1x quiet-user { all | mac-address mac-address } command to check information about 802.1X authentication users who are quieted.
  • Run the display access-user dot1x-identity statistics command to display statistics about Identity packets for 802.1X authentication on a switch.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20325

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next