No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Authorization State of an Interface

(Optional) Configuring the Authorization State of an Interface

Context

You can configure the authorization state of an interface to control whether an access user must be authenticated before accessing network resources. The interface supports the following authentication states:
  • Auto mode: The interface is initially in Unauthorized state and sends and receives EAPoL packets only. Users cannot access network resources. After a user passes the authentication, the interface turns to Authorized state. Users are allowed to access network resources in this state.
  • Authorized-force mode: The interface is always in Authorized state and allows users to access network resources without authentication.
  • Unauthorized-force mode: The interface is always in Unauthorized state and does not allow users to access network resources.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Configure the authorization state of an interface in the system or interface view.

    • In the system view:

    1. Run dot1x port-control { auto | authorized-force | unauthorized-force } interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>

      The authorization state of the interface is configured.

    • In the interface view:

    1. Run interface interface-type interface-number

      The interface view is displayed.

    2. Run dot1x port-control { auto | authorized-force | unauthorized-force }

      The authorization state of the interface is configured.

    By default, the authorization state of an interface is auto.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 23155

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next