No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - User Access and Authentication

This document describes the configurations of User Access and Authentication Configuration, including AAA, NAC, and Policy Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Local Authentication and Authorization Configuration

Verifying the Local Authentication and Authorization Configuration

Procedure

  • Run the display aaa configuration command to check the AAA summary.
  • Run the display authentication-scheme [ authentication-scheme-name ] command to verify the authentication scheme configuration.
  • Run the display authorization-scheme [ authorization-scheme-name ] command to verify the authorization scheme configuration.
  • To verify information about access users, run the following commands:

    • display access-user [ domain domain-name | interface interface-type interface-number [ vlan vlan-id [ qinq qinq-vlan-id ] ] | ip-address ip-address [ vpn-instance vpn-instance-name ] | ipv6-address ipv6-address | access-slot slot-id ] [ detail ]
    • display access-user username user-name [ detail ]
    • display access-user [ mac-address mac-address | service-scheme service-scheme-name | user-id user-id ]
    • display access-user access-type { admin [ ftp | ssh | telnet | terminal | web ] | ppp } [ username user-name ]

  • Run the display domain [ name domain-name ] command to verify the domain configuration.
  • Run the display local-user [ domain domain-name | state { active | block } | username username ] * command to check the brief information about local users.
  • Run the display local-aaa-user password policy { access-user | administrator } command to display the password policy for local users.
  • Run the display local-user expire-time command to verify the time when the local account expires.
  • Run the display aaa statistics access-type-authenreq command to verify the number of authentication requests.
  • Run the display access-user user-name-table statistics { all | username username } command to check statistics on users who are allowed to access the network using the user name.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066170

Views: 20718

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next