No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Saving Configuration

Saving Configuration

After performing configuration, you need to save the configuration data. Otherwise, the configurations will be lost after the device restarts.

Click Save at the upper right corner to save all the configuration data to the configuration file.

  • Click Save at the upper right corner after the preceding configuration; otherwise, the configuration that has not been saved will be lost upon reboot.

  • After you click OK or Apply on the current configuration page, the device continues the operation but does not save configuration.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7300

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next