No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network

Network

To configure the EasyDeploy function, determine roles of devices first. After a device is configured as the Commander, you can view client information, configure and upgrade clients, and view power consumption of the device and the entire network on the Commander. The S600-E can only be configured as the client.
NOTE:

The device that cannot work as the Commander can only be configured as the client, and the Summary, Deployment, Batch Configuration, and Power Consumption menus are not available.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7359

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next