No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring EasyDeploy

Example for Configuring EasyDeploy

Networking Requirements

On an enterprise network shown in Figure 9-20, EasyDeploy is deployed to implement automatic configuration, unified deployment, and unified maintenance of devices. The user requires that SwitchA serve as the Commander and SwitchC, SwitchD, and SwitchE serve as clients to form an EasyDeploy network.

Figure 9-20  EasyDeploy networking

Configuration Roadmap

  1. Log in to SwitchC, SwitchD, and SwitchE through the web system and configure them as clients.

Procedure

  1. Log in to SwitchC, SwitchD, and SwitchE through the web system and configure them as clients.
    1. Click Network in the function area. The Network page is displayed.
    2. In the navigation tree, click Role Configuration. The Role Configuration page is displayed.
    3. Click the Client option button, as shown in Figure 9-21.

      Figure 9-21  Role Configuration

    4. Enter the Commander IP address, which must be the same as that configured on the Commander. Use the default UDP port.
    5. Click Apply. The configuration is complete.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7271

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next