No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Administrator

Administrator

Administrator

Context

User management includes creating a local user account (web platform user with the access type HTTP) and modifying or deleting existing user accounts.

By default, a local user named admin exists in the system. The user password is admin@huawei.com, and access types are HTTP and Terminal.

NOTE:

Security risks exist if the user access type is set to Telnet, FTP or HTTP. You are advised to configure the required access modes only.

A simple password brings security risks. It is recommended that you change the password to a complicated one after logging in to the web network management system using the default account. A password should consist of at least 8 characters, and contain at least two types of the following: lowercase letters, uppercase letters, numerals, special characters (such as ! $ # %). The password cannot contain spaces and single quotation marks ('). In addition, the password cannot be the same as the user name or the mirror user name.

If the password configured in local user creation or modification is the same as the default password, security risk exists. To ensure device security, change the password periodically.

The user list includes information about the users whose user types are FTP, HTTP, SSH, Telnet, Terminal, or x25-pad. The access type of a created user can be FTP, HTTP, SSH, Telnet, Terminal, or x25-pad.

Procedure

  • Create a user account.

    1. Choose Maintenance > System Maintenance > Administrator and click the Administrator tab, as shown in Figure 7-10.

      Figure 7-10  Administrator

    2. Click Create to display the Create User page, as shown in Figure 7-11.

      Figure 7-11  Create User

      Table 7-5 describes the parameters for creating a user.

      Table 7-5  Create User/Modify User

      Parameter

      Description

      User name

      Indicates the new user name.

      The user name cannot contain question marks (?) or spaces.

      Old password

      Indicates the current web system login password.

      NOTE:

      This option is available only on the modification page of the current login user.

      Password

      Indicates the user password.

      Confirm password

      Indicates the confirm password. The format is the same as that of Password.

      HTTP directory

      Indicates the directory that HTTP users can access.

      Access level

      Indicates the user level.

      There are two user levels in ascending order: monitoring user and management user.

      Access type

      Configure the user access type.

      Forced offline

      Indicates whether a user is forcibly disconnected from the network.

      NOTE:

      This parameter is only displayed on the user modification page.

    3. Set the parameters.

    4. Click OK.

  • Modify user information.

    1. Choose Maintenance > System Maintenance > Administrator and click the Administrator tab.

    2. Click the user account to be modified to access the Modify User page, as shown in Figure 7-12.

      Figure 7-12  Modify User

      NOTE:
      • Table 7-5 describes the parameters for modifying user information. After the user attribute is changed, the user level is 3 for a management-level user and 1 for a monitoring-level user.

      • After you modify the user attribute, you need to log out and then log in again to make the modification take effect.

      • The user name is fixed and cannot be changed.

    3. Set the parameters.

    4. Click OK.

  • Delete a user account.

    1. Choose Maintenance > System Maintenance > Administrator and click the Administrator tab.

    2. Select the user account to be deleted and click Delete.

    3. Click OK in the dialog box that is displayed.

Password Policy

Procedure

  1. Choose Maintenance > System Maintenance > Administrator and click the Password Policy tab, as shown in Figure 7-13.

    Figure 7-13  Password Policy

    Table 7-6 describes the parameters on the page.
    Table 7-6  Password Policy

    Item

    Description

    Set Password Policy for Administrator

    Password policy

    Indicates whether the password policy is enabled for local administrator.
    • ON
    • OFF

    History password records

    Indicates the maximum number of historical passwords recorded for the local administrator. The value is an integer ranging from 0 to 12. The default value is 5.

    Validity period (days)

    Indicates the password validity period in number of days. The value is an integer ranging from 0 to 999. The default value is 90.

    Remaining days

    Indicates how long the system displays a prompt before the password expires. The value is an integer ranging from 0 to 999. The default value is 30.

    Set Password Policy for Common User

    Password policy

    Indicates whether the password policy is enabled for local user.
    • ON
    • OFF

    History password records

    Indicates the maximum number of historical passwords recorded for the local administrator. The value is an integer ranging from 0 to 12. The default value is 5.

  2. Set the parameters.
  3. Click Apply.

Online Administrator

Procedure

  1. Choose Maintenance > System Maintenance > Administrator and click the Online Administrator tab, as shown in Figure 7-14.

    Figure 7-14  Online User List

  2. Select one or more users and click Forcible Logout to force the user or users to go offline.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7181

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next