No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



  1. Click Network in the function area to display the Network page.
  2. Click Role Configuration in the navigation tree to display the Role Configuration page.
  3. Click the Client option button, as shown in Figure 8-1.

    Figure 8-1  Role Configuration

  4. Enter the Commander IP address and UDP port and select whether to enable the network topology collection function. The Commander IP address you enter here must be the same as that configured on the Commander. If you keep the UDP port blank, the default UDP port is used.
  5. Click Apply.


    After completing the client configuration, you can click Go to commander web NMS to view Commander information or configure the Commander.

Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7281

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next