No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a User Account

Creating a User Account

Context

You can add user accounts to a switch to allow it to authenticate and authorize login users based on the local user information. You can also create multiple user accounts and assign different user levels and passwords for them to refine user management.

Only administrative users can add user accounts.

NOTE:

You can create a user account of the same or a lower level.

Procedure

  1. Choose Maintenance > System Maintenance > Administrator.
  2. Click Create. The Create User dialog box is displayed.
  3. On the Create User page, enter values in User name, Password, and Confirm password and select values for Access level and Access type, as shown in Figure 3-2.

    Figure 3-2  Create User

  4. Click OK.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7248

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next