No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



There are two types of patches: cold patch and hot patch. A cold patch takes effect only after the switch restarts and a hot patch takes effect immediately after it is loaded to the switch.

  • A patch is a kind of software compatible with the system software. It is used to remove critical bugs of the system software. The extension name of the patch file is .pat.
  • Before loading patches, you need to save patch files to the storage device of the switch. Patch files are uploaded to the switch using HTTP.
  • After a patch is uninstalled, delete the patch from the memory.


  1. Choose Maintenance > System Maintenance > Patch to access the Patch page, as shown in Figure 7-4.

    Figure 7-4  Patch

    Table 7-4 describes the parameters on the page.

    Table 7-4  Parameters on the Patch page



    Upload Patch

    Allows you to select the patch file to be uploaded.

    Load Patch

    Allows you to select the patch file to be loaded.

    Patch Info

    Indicates patch information:
    • Current patch file
    • Version number
    • Status

    Click Uninstall to delete the installed patches.

  2. Click to select the patch file to be uploaded and click Upload.
  3. Select the patch file to be loaded and click Load. The system will display the currently loaded patch file in Patch Info.
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7274

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next