No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging Out of the Web System

Logging Out of the Web System

You can log out of the web system in either of the following ways:
  • Click on the upper right corner of the page to close the browser.
  • Click on any page of the browser.

If you use the first method, save the configurations before you close the browser. Otherwise, the configurations will be lost. If you use the second method, a message is displayed on the web system, asking whether you want to save the current configuration.

Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7348

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next