No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Navigation Tree

Navigation Tree

The web system consists of five areas: Monitoring, Configuration, Diagnosis, Maintenance, and Network, and provides the following functions: device status overview, interface management, VLAN, DHCP, system management, service management, diagnosis tool, and network deployment.

Table 3-2 lists submenus in the four areas and describes their functions.


The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.

Table 3-2  Description of the web system menus






The panel of a switch displays the panel of the switch.

System Description

Display the product model, device name, device running time, and serial number.

Switch Status

Display the CPU usage, memory usage, temperature, and fan status.

TOP 5 Bandwidth Utilization

Display top 5 interface bandwidth utilization, including bandwidth utilization in the incoming and outgoing directions, the number of error packets in the incoming and outgoing directions, and the number of broadcast packets in the incoming and outgoing directions.


Display the latest five logs, including the time when logs are generated, log level, and log content.


Display the latest five alarms, including the time when alarms are generated, alarm severity, and alarm content.

Power status

Display power module presence information and working status, total power of PoE powers, and available PoE power.


Quick Config

Quickly configure switching and routing modes.

Basic Services

Interface Settings

Interface configuration includes the following configuration pages: View Configuration, Connect to PC, Connect to IP Phone, Connect to Switch, Enable/Disable Interface, and Detect Link.

View Transceiver Info

Display optical module information.


Configure and query VLANs, Modify VLANs, and Delete VLANs.


Configure and query DHCP address pool on VLANIF interface, and DHCP relay.

Static Route

Configure static routes.

Advanced Services

Voice VLAN

Configure voice VLAN.


Query MAC/IP address table, Configure static MAC address entries, Configure static secure MAC address, Configure blackhole MAC address entries, and Delete MAC address entries function.

IP Services

Configure IP services.

IP Route

Configure IP route.


Configure VRRP.


Configure the loopback detection function.


Configure the STP function.


Configure the LLDP function.

IGMP Snooping

Configure IGMP snooping.

MLD Snooping

Configure MLD snooping.


Provide PoE management.


Configure mirroring.


Configure stack.

Security Services


Configure interface ACLs and VLAN ACLs to filter packets.

User Access Control

Configure Authentication Configuration, Portal Server, and Access Configuration to provide security management on the network.

QoS Configuration

Configure QoS.

IP Security

Configure IP security.

Storm Control

Configure storm control.

Port Isolation

Configure port isolation.


One-Click Information Collection Collect information on a device, including the configuration, logs, and errors.
Ping Check network connectivity and host reachability.
Trace RouteC Check the gateways that packets pass through from the source host to the destination host.
AAA Test Check whether the user can pass the RADIUS authentication.


System Maintenance


Restart the switch.


Upgrade the system software.

Web File Management Manage web files.


Upload, install, and uninstall patches.


Display the latest 300 logs.


Display the latest 300 alarms.


Manage web users.


Manage the system, including files, system time, system information, and factory settings recovery.


Configure the SNMP agent function.

Electronic Label

Display elabel information on the switch.


Role Configuration

Determine the role of a device before configuring EasyDeploy on the device.

Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7393

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next