No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mirroring

Mirroring

Port Mirroring Display

Procedure

  1. Choose Configuration > Advanced Services > Mirroring to open the Mirroring page.
  2. Click the Port Mirroring Display tab to open the Port Mirroring Display page, as shown in Figure 5-94.

    Figure 5-94  Port mirroring display page

  3. Select the Display observing port check box to check an observing port.
  4. Select the Display all mirrored port check box to check all mirrored port.
  5. Select the Display uplink mirrored port check box to check an inbound mirrored port.
  6. Select the Display downlink mirrored port check box to check an outbound mirrored port.
  7. Select the Display bidirectional mirrored port check box to check a bidirectional mirrored port.

Port Mirroring Configuration

Context

In port mirroring, packets passing through mirrored ports are copied and then sent to specified observing ports for analysis and monitoring.
NOTE:
  • If N:1 mirroring or multiple 1:1 mirroring configurations are implemented, mirrored packets may be lost.
  • The physical port cannot be configured as an observing port and mirrored port simultaneously.
  • If both port mirroring and traffic mirroring are configured simultaneously for the same packets, port mirroring takes effect

Procedure

  1. Choose Configuration > Advanced Services > Mirroring to open the Mirroring page.
  2. Click the Port Mirroring Configuration tab to open the Port Mirroring Configuration page, as shown in Figure 5-95.

    Figure 5-95  Port mirroring configuration page

  3. Click Select following Select observing port, Inbound mirrored port, and Outbound mirrored port in sequence to open the Select page, as shown in Figure 5-96.

    Figure 5-96  Select port page

    NOTE:

    If you do not configure ports in the preceding sequence, the selected port is automatically configured as the first port that is not configured. For example, if Outbound mirrored port is configured but Select observing port and Inbound mirrored port are not configured, the selected Outbound mirrored port is automatically configured as Select observing port.

  4. Select the icons of the interfaces to be configured as an observing port, inbound mirrored port, or outbound mirrored port, and click OK.
  5. Click Apply. In the dialog box that is displayed, click OK to complete the configuration.
  6. Click Clear Mirroring Configuration to clear the previous port mirroring configuration.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7367

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next